Anise extract
Effect of Anise Extract as Green Corrosion Inhibitor Carbon Steel in CO2-Containing Salt [Volume 4, Issue 2, 2015, Pages 37-46]
Aqueous colloidal coating approach
The Effect of Synthesis Route on the Microstructure and Dielectric Properties of Bulk (K0.44-Na0.52Li0.04)(Ta0.1Sb0.06Nb0.84)O3 Piezoceramics [Volume 4, Issue 2, 2015, Pages 11-17]
Arylamide
Prevent Soil loss by Copolymer Based on Polyacrylamide [Volume 4, Issue 4, 2015, Pages 63-69]
Atmosphere Plasma Spray (APS)
Modification of Plasma Spray Parameters of NiCrAlY Nano Particles for Achievement of Nano Structure TBC [Volume 4, Issue 4, 2015, Pages 1-10]
Au/Ag nanoparticles
Investigation of Antibacterial Properties of TaN-(Ag/Au) Nanocomposite Thin Films Using Surgical Instruments [Volume 4, Issue 2, 2015, Pages 47-51]
Austenite Decomposition
The Influence of Different Heat Treatments on the Phase Transformation Temperatures of API-X70 Steel Containing Banded Structure [Volume 4, Issue 4, 2015, Pages 55-62]
B
Bioactive Glass
Investigation of Sol-Gel Derived SiO2 - P2O5 – CaO- Na2O Bioactive Glass Using Various Precursors [Volume 4, Issue 3, 2015, Pages 9-16]
Bond Coat
Modification of Plasma Spray Parameters of NiCrAlY Nano Particles for Achievement of Nano Structure TBC [Volume 4, Issue 4, 2015, Pages 1-10]
C
CaF2 crystals
Investigation into the Processing of Transparent Oxyfluoride Glass and Glass Ceramics Containing CaF2 Nanocrystals in Presence of K2O Additive [Volume 4, Issue 3, 2015, Pages 1-7]
Chemical Method
Effect of Annealing Temperature on Structural Properties of Nanostructured TiN-3DG Composite Synthesized by Chemical Method [Volume 4, Issue 1, 2015, Pages 13-19]
CK10 carbon steel
Effect of Anise Extract as Green Corrosion Inhibitor Carbon Steel in CO2-Containing Salt [Volume 4, Issue 2, 2015, Pages 37-46]
CO2 corrosion
Effect of Anise Extract as Green Corrosion Inhibitor Carbon Steel in CO2-Containing Salt [Volume 4, Issue 2, 2015, Pages 37-46]
Composite
Study and Specification of Optimal Liquid Phase Sintering Temperature for Production of Tungsten-Copper Composite [Volume 4, Issue 2, 2015, Pages 63-69]
Conversion efficiency
The Synthesis of Two New Dye based on Thioindigo and Investigation of their Properties in Dye-Sensitized Solar Cells [Volume 4, Issue 1, 2015, Pages 39-45]
Copolymer
Prevent Soil loss by Copolymer Based on Polyacrylamide [Volume 4, Issue 4, 2015, Pages 63-69]
Copper phthalocyanine
The Performance Corrosion Protection of Self-Assembled Copper Phthalocyanine/Nanostructure Hybrid Coating on Carbon Steel in Acidic Solution [Volume 4, Issue 4, 2015, Pages 43-53]
Corrosion Resistance
Effect of Tempertureon Properties and Corrosion Behavior of Electroplated Nickel- Graphene Composite Coating [Volume 4, Issue 4, 2015, Pages 19-26]
Cracking
Intercorrelation of Interpass Temperature – Base Metal Thickness – Microstructure and Cracking of Weld Metal Deposited from E8010-P1 Cellulosic Electrodes [Volume 4, Issue 4, 2015, Pages 27-35]
CVD
Synthesis and Electrical Properties Evaluation of Three-Dimensional Graphene [Volume 4, Issue 3, 2015, Pages 17-23]
D
Dielectric properties
The Effect of Synthesis Route on the Microstructure and Dielectric Properties of Bulk (K0.44-Na0.52Li0.04)(Ta0.1Sb0.06Nb0.84)O3 Piezoceramics [Volume 4, Issue 2, 2015, Pages 11-17]
Dye-sensitized solar cell
The Synthesis of Two New Dye based on Thioindigo and Investigation of their Properties in Dye-Sensitized Solar Cells [Volume 4, Issue 1, 2015, Pages 39-45]
E
E8010-P1
Intercorrelation of Interpass Temperature – Base Metal Thickness – Microstructure and Cracking of Weld Metal Deposited from E8010-P1 Cellulosic Electrodes [Volume 4, Issue 4, 2015, Pages 27-35]
Electrical conductivity
Synthesis and Electrical Properties Evaluation of Three-Dimensional Graphene [Volume 4, Issue 3, 2015, Pages 17-23]
Electrochromic
Investigation of Electrolyte Dependence on Electrochromic Properties of Electrodeposited Fe2O3 Thin Film [Volume 4, Issue 3, 2015, Pages 39-44]
Electrodeposition
Investigation of Electrolyte Dependence on Electrochromic Properties of Electrodeposited Fe2O3 Thin Film [Volume 4, Issue 3, 2015, Pages 39-44]
Electron Mobility
Improving Electronic Parameters of Silicon Nanowires by Arsenic and Phosphor dopants [Volume 4, Issue 4, 2015, Pages 11-17]
Electroplating
Effect of Tempertureon Properties and Corrosion Behavior of Electroplated Nickel- Graphene Composite Coating [Volume 4, Issue 4, 2015, Pages 19-26]
Ethylene glycol
Effect of Anise Extract as Green Corrosion Inhibitor Carbon Steel in CO2-Containing Salt [Volume 4, Issue 2, 2015, Pages 37-46]
F
FE-SEM
Synthesis and Characterization of the Composite Co/VC Nano Powder by Mechanochemical Method and Investigating the Reaction Thermodynamic Behavior [Volume 4, Issue 3, 2015, Pages 45-52]
Finemet alloy
Effect of Hot Pressing on the Microstructure and Magnetic Properties of the Nanocrystalline Finemet alloy [Volume 4, Issue 1, 2015, Pages 47-54]
Friction Stir Processing
Evaluation of Microstructure and Mechanical Properties of Ti-Al2O3 Nano-Composites Fabricated by Friction Stir Processing [Volume 4, Issue 1, 2015, Pages 1-11]
G
GTAW
Improvement of Tribology Properties St37 Steel by Formation of Composite Layer Containing Alumina Particles by GTAW Welding Method [Volume 4, Issue 2, 2015, Pages 53-61]
H
Heat treatment
Synthesis and Corrosion Behavior of Nanostructure Cerium Oxide Coating on Stainless Steel [Volume 4, Issue 4, 2015, Pages 37-42]
Heat treatment
The Influence of Different Heat Treatments on the Phase Transformation Temperatures of API-X70 Steel Containing Banded Structure [Volume 4, Issue 4, 2015, Pages 55-62]
Hot press
Effect of Hot Pressing on the Microstructure and Magnetic Properties of the Nanocrystalline Finemet alloy [Volume 4, Issue 1, 2015, Pages 47-54]
Hot pressing
Investigation of Niobium Addition Effect on Oxidation Resistance of Ti-48Al/Ti2AlC Composite [Volume 4, Issue 1, 2015, Pages 21-30]
Hybrid Sol-Gel coating
The Performance Corrosion Protection of Self-Assembled Copper Phthalocyanine/Nanostructure Hybrid Coating on Carbon Steel in Acidic Solution [Volume 4, Issue 4, 2015, Pages 43-53]
Hydrophobic
Investigation of Antibacterial Properties of TaN-(Ag/Au) Nanocomposite Thin Films Using Surgical Instruments [Volume 4, Issue 2, 2015, Pages 47-51]
I
Immobilization
Tuning the Morphology of SBA-15 Silica Materials from Rodlike to Platelet in the Presence of Zirconium [Volume 4, Issue 3, 2015, Pages 25-32]
Inhibitor
Comparison of Corrosion Behavior of 1.4361 Si-Alloyed and 316 Austenitic Stainless Steels in Nitric Acid Based Propellant [Volume 4, Issue 2, 2015, Pages 19-26]
Inhibitor
Effect of Anise Extract as Green Corrosion Inhibitor Carbon Steel in CO2-Containing Salt [Volume 4, Issue 2, 2015, Pages 37-46]
Interpass Temperature
Intercorrelation of Interpass Temperature – Base Metal Thickness – Microstructure and Cracking of Weld Metal Deposited from E8010-P1 Cellulosic Electrodes [Volume 4, Issue 4, 2015, Pages 27-35]
Iron
Process Design of Titanomagnetite Placer Mine Beneficiation for Co-Extraction of Vanadium, Titanium and Iron Elements [Volume 4, Issue 2, 2015, Pages 27-36]
K
K2O additive
Investigation into the Processing of Transparent Oxyfluoride Glass and Glass Ceramics Containing CaF2 Nanocrystals in Presence of K2O Additive [Volume 4, Issue 3, 2015, Pages 1-7]
L
Lipase
Tuning the Morphology of SBA-15 Silica Materials from Rodlike to Platelet in the Presence of Zirconium [Volume 4, Issue 3, 2015, Pages 25-32]
Liquid phase sintering
Study and Specification of Optimal Liquid Phase Sintering Temperature for Production of Tungsten-Copper Composite [Volume 4, Issue 2, 2015, Pages 63-69]
M
Mean Free Path
Improving Electronic Parameters of Silicon Nanowires by Arsenic and Phosphor dopants [Volume 4, Issue 4, 2015, Pages 11-17]
Mechanical properties
Evaluation of Microstructure and Mechanical Properties of Ti-Al2O3 Nano-Composites Fabricated by Friction Stir Processing [Volume 4, Issue 1, 2015, Pages 1-11]
Mechanochemical
Synthesis and Characterization of the Composite Co/VC Nano Powder by Mechanochemical Method and Investigating the Reaction Thermodynamic Behavior [Volume 4, Issue 3, 2015, Pages 45-52]
Melt spin
Effect of Hot Pressing on the Microstructure and Magnetic Properties of the Nanocrystalline Finemet alloy [Volume 4, Issue 1, 2015, Pages 47-54]
Mesoporous silica materials
Tuning the Morphology of SBA-15 Silica Materials from Rodlike to Platelet in the Presence of Zirconium [Volume 4, Issue 3, 2015, Pages 25-32]
Microalloy Steel
The Influence of Different Heat Treatments on the Phase Transformation Temperatures of API-X70 Steel Containing Banded Structure [Volume 4, Issue 4, 2015, Pages 55-62]
Microstructure
Evaluation of Microstructure and Mechanical Properties of Ti-Al2O3 Nano-Composites Fabricated by Friction Stir Processing [Volume 4, Issue 1, 2015, Pages 1-11]
Microstructure
The effect of BaZrO3 addition on microstructure and microwave dielectric properties of (0.9-x)Ba([Zn0.6Co0.4]1/3,Nb2/3) O3–0.1Ba(Ga1/2Ta1/2)O3–xBaZrO3 ceramics with x=0-0.1 [Volume 4, Issue 1, 2015, Pages 55-62]
Microstructure
Improvement of Tribology Properties St37 Steel by Formation of Composite Layer Containing Alumina Particles by GTAW Welding Method [Volume 4, Issue 2, 2015, Pages 53-61]
Microstructure
The Influence of Different Heat Treatments on the Phase Transformation Temperatures of API-X70 Steel Containing Banded Structure [Volume 4, Issue 4, 2015, Pages 55-62]
MSR
Synthesis and Characterization of the Composite Co/VC Nano Powder by Mechanochemical Method and Investigating the Reaction Thermodynamic Behavior [Volume 4, Issue 3, 2015, Pages 45-52]
N
Nanocomposite
Synthesis and Characterization of the Composite Co/VC Nano Powder by Mechanochemical Method and Investigating the Reaction Thermodynamic Behavior [Volume 4, Issue 3, 2015, Pages 45-52]
Nanostructure
Synthesis and Corrosion Behavior of Nanostructure Cerium Oxide Coating on Stainless Steel [Volume 4, Issue 4, 2015, Pages 37-42]
NiCrAlY
Modification of Plasma Spray Parameters of NiCrAlY Nano Particles for Achievement of Nano Structure TBC [Volume 4, Issue 4, 2015, Pages 1-10]
Niobium
Investigation of Niobium Addition Effect on Oxidation Resistance of Ti-48Al/Ti2AlC Composite [Volume 4, Issue 1, 2015, Pages 21-30]
O
Orientation
Effect of the SPS Parameters on the Density of Sintered ZnSe [Volume 4, Issue 1, 2015, Pages 63-69]
P
Perovskite
The effect of BaZrO3 addition on microstructure and microwave dielectric properties of (0.9-x)Ba([Zn0.6Co0.4]1/3,Nb2/3) O3–0.1Ba(Ga1/2Ta1/2)O3–xBaZrO3 ceramics with x=0-0.1 [Volume 4, Issue 1, 2015, Pages 55-62]
Photoelectric Parameters
Optimization of Parameters from Perovskite Solar Cells by ZnO Aligned Nanorods [Volume 4, Issue 3, 2015, Pages 53-64]
Photovoltaic materials
The Synthesis of Two New Dye based on Thioindigo and Investigation of their Properties in Dye-Sensitized Solar Cells [Volume 4, Issue 1, 2015, Pages 39-45]
Pipe Lines
Intercorrelation of Interpass Temperature – Base Metal Thickness – Microstructure and Cracking of Weld Metal Deposited from E8010-P1 Cellulosic Electrodes [Volume 4, Issue 4, 2015, Pages 27-35]
Potassium sodium niobate
The Effect of Synthesis Route on the Microstructure and Dielectric Properties of Bulk (K0.44-Na0.52Li0.04)(Ta0.1Sb0.06Nb0.84)O3 Piezoceramics [Volume 4, Issue 2, 2015, Pages 11-17]
Powder Metallurgy
Study and Specification of Optimal Liquid Phase Sintering Temperature for Production of Tungsten-Copper Composite [Volume 4, Issue 2, 2015, Pages 63-69]
Prehydrolysis
Tuning the Morphology of SBA-15 Silica Materials from Rodlike to Platelet in the Presence of Zirconium [Volume 4, Issue 3, 2015, Pages 25-32]
Q
Quality factor
The effect of BaZrO3 addition on microstructure and microwave dielectric properties of (0.9-x)Ba([Zn0.6Co0.4]1/3,Nb2/3) O3–0.1Ba(Ga1/2Ta1/2)O3–xBaZrO3 ceramics with x=0-0.1 [Volume 4, Issue 1, 2015, Pages 55-62]
S
SBA-15
Tuning the Morphology of SBA-15 Silica Materials from Rodlike to Platelet in the Presence of Zirconium [Volume 4, Issue 3, 2015, Pages 25-32]
Self assembled thin film
The Performance Corrosion Protection of Self-Assembled Copper Phthalocyanine/Nanostructure Hybrid Coating on Carbon Steel in Acidic Solution [Volume 4, Issue 4, 2015, Pages 43-53]
SEM
The Effect of Synthesis Route on the Microstructure and Dielectric Properties of Bulk (K0.44-Na0.52Li0.04)(Ta0.1Sb0.06Nb0.84)O3 Piezoceramics [Volume 4, Issue 2, 2015, Pages 11-17]
Sil erosion
Prevent Soil loss by Copolymer Based on Polyacrylamide [Volume 4, Issue 4, 2015, Pages 63-69]
Si Nanowire
Improving Electronic Parameters of Silicon Nanowires by Arsenic and Phosphor dopants [Volume 4, Issue 4, 2015, Pages 11-17]
Sintering
The effect of BaZrO3 addition on microstructure and microwave dielectric properties of (0.9-x)Ba([Zn0.6Co0.4]1/3,Nb2/3) O3–0.1Ba(Ga1/2Ta1/2)O3–xBaZrO3 ceramics with x=0-0.1 [Volume 4, Issue 1, 2015, Pages 55-62]
SMAW
Intercorrelation of Interpass Temperature – Base Metal Thickness – Microstructure and Cracking of Weld Metal Deposited from E8010-P1 Cellulosic Electrodes [Volume 4, Issue 4, 2015, Pages 27-35]
Sodium nitrate
Investigation of Sol-Gel Derived SiO2 - P2O5 – CaO- Na2O Bioactive Glass Using Various Precursors [Volume 4, Issue 3, 2015, Pages 9-16]
Soft magnetic alloy
Effect of Hot Pressing on the Microstructure and Magnetic Properties of the Nanocrystalline Finemet alloy [Volume 4, Issue 1, 2015, Pages 47-54]
Soil loss
Prevent Soil loss by Copolymer Based on Polyacrylamide [Volume 4, Issue 4, 2015, Pages 63-69]
Solar Cell
Optimization of Parameters from Perovskite Solar Cells by ZnO Aligned Nanorods [Volume 4, Issue 3, 2015, Pages 53-64]
Sol-Gel
Investigation of Sol-Gel Derived SiO2 - P2O5 – CaO- Na2O Bioactive Glass Using Various Precursors [Volume 4, Issue 3, 2015, Pages 9-16]
Sol-Gel
Synthesis and Corrosion Behavior of Nanostructure Cerium Oxide Coating on Stainless Steel [Volume 4, Issue 4, 2015, Pages 37-42]
SPS
Effect of the SPS Parameters on the Density of Sintered ZnSe [Volume 4, Issue 1, 2015, Pages 63-69]
Stainless steel
Synthesis and Corrosion Behavior of Nanostructure Cerium Oxide Coating on Stainless Steel [Volume 4, Issue 4, 2015, Pages 37-42]
Structural properties
Effect of Annealing Temperature on Structural Properties of Nanostructured TiN-3DG Composite Synthesized by Chemical Method [Volume 4, Issue 1, 2015, Pages 13-19]
T
TaN
Investigation of Antibacterial Properties of TaN-(Ag/Au) Nanocomposite Thin Films Using Surgical Instruments [Volume 4, Issue 2, 2015, Pages 47-51]
Thermal Barrier Coating (TBC)
Modification of Plasma Spray Parameters of NiCrAlY Nano Particles for Achievement of Nano Structure TBC [Volume 4, Issue 4, 2015, Pages 1-10]
Thin film
Investigation of Electrolyte Dependence on Electrochromic Properties of Electrodeposited Fe2O3 Thin Film [Volume 4, Issue 3, 2015, Pages 39-44]
Thioindigo
The Synthesis of Two New Dye based on Thioindigo and Investigation of their Properties in Dye-Sensitized Solar Cells [Volume 4, Issue 1, 2015, Pages 39-45]
Three-dimensional Graphene
Effect of Annealing Temperature on Structural Properties of Nanostructured TiN-3DG Composite Synthesized by Chemical Method [Volume 4, Issue 1, 2015, Pages 13-19]
Three-dimensional Graphene
Synthesis and Electrical Properties Evaluation of Three-Dimensional Graphene [Volume 4, Issue 3, 2015, Pages 17-23]
Ti
Evaluation of Microstructure and Mechanical Properties of Ti-Al2O3 Nano-Composites Fabricated by Friction Stir Processing [Volume 4, Issue 1, 2015, Pages 1-11]
Ti-48Al/Ti2AlC composite
Investigation of Niobium Addition Effect on Oxidation Resistance of Ti-48Al/Ti2AlC Composite [Volume 4, Issue 1, 2015, Pages 21-30]
Titanium
Process Design of Titanomagnetite Placer Mine Beneficiation for Co-Extraction of Vanadium, Titanium and Iron Elements [Volume 4, Issue 2, 2015, Pages 27-36]
Titanium Nitride
Effect of Annealing Temperature on Structural Properties of Nanostructured TiN-3DG Composite Synthesized by Chemical Method [Volume 4, Issue 1, 2015, Pages 13-19]
Titanomagnetite
Process Design of Titanomagnetite Placer Mine Beneficiation for Co-Extraction of Vanadium, Titanium and Iron Elements [Volume 4, Issue 2, 2015, Pages 27-36]
Transmission Spectra
Improving Electronic Parameters of Silicon Nanowires by Arsenic and Phosphor dopants [Volume 4, Issue 4, 2015, Pages 11-17]
Tungsten
Study and Specification of Optimal Liquid Phase Sintering Temperature for Production of Tungsten-Copper Composite [Volume 4, Issue 2, 2015, Pages 63-69]
V
Vanadium
Process Design of Titanomagnetite Placer Mine Beneficiation for Co-Extraction of Vanadium, Titanium and Iron Elements [Volume 4, Issue 2, 2015, Pages 27-36]
Vanadium carbide
Synthesis and Characterization of the Composite Co/VC Nano Powder by Mechanochemical Method and Investigating the Reaction Thermodynamic Behavior [Volume 4, Issue 3, 2015, Pages 45-52]
W
Wear
Improvement of Tribology Properties St37 Steel by Formation of Composite Layer Containing Alumina Particles by GTAW Welding Method [Volume 4, Issue 2, 2015, Pages 53-61]
Work Function
Synthesis and Electrical Properties Evaluation of Three-Dimensional Graphene [Volume 4, Issue 3, 2015, Pages 17-23]
X
XRD
The Effect of Synthesis Route on the Microstructure and Dielectric Properties of Bulk (K0.44-Na0.52Li0.04)(Ta0.1Sb0.06Nb0.84)O3 Piezoceramics [Volume 4, Issue 2, 2015, Pages 11-17]
Z
Zinc-Tin electroplating
Effect of Coating Processes Parameters on Structure and Micro Hardness of Zn-Sn Alloy Coating Via Electroplating [Volume 4, Issue 2, 2015, Pages 1-9]
ZnO
Optimization of Parameters from Perovskite Solar Cells by ZnO Aligned Nanorods [Volume 4, Issue 3, 2015, Pages 53-64]
ZnSe
Effect of the SPS Parameters on the Density of Sintered ZnSe [Volume 4, Issue 1, 2015, Pages 63-69]